01 Feeding Bags & Bag Sets
Define capacity, fill and closure, hanger, outlet, tubing, control and patient end.
Enteral feeding & nutrition administration
Build the enteral pathway from source to patient connection.
Choose feeding bags, spike sets, administration sets, extension sets or syringes first. Then define source, delivery method, tubing, connection system, packaging and destination-market requirements as one controlled enteral pathway.
Representative BQ+ enteral feeding configuration
Keep enteral separate Not an I.V. set with another connector
Define the source Bag, container and upstream interface
Gravity or specified pump Different routes need different inputs
Confirm connector by REF Terminology and status are product-specific
Enteral product families
Choose the product route first.
These families can be reviewed as a coordinated portfolio while each product retains its own controlled configuration and status.
01 02 Spike & Container Sets
Match the source interface with tubing, control and downstream enteral connection.
03 Enteral Administration Sets
Configure gravity or project-specific pump feeding around the intended workflow.
04 Enteral Extension Sets
Define length, bore, connectors, clamps and access within the enteral pathway.
05 Enteral Syringes
Review size, connector, tip or cap, graduation, packaging and intended use by REF.
06 Enteral Connectors & Adaptors
Confirm connector roles across source, administration, extension, syringe and patient access.
Build the controlled configuration
Compare the complete pathway, not one isolated feature.
01 Define the feeding source
02 Choose gravity or specified pump delivery
03 Map the enteral connection system
04 Confirm packaging and market pathway
1
Source and fill method Bag, ready-to-use container or another defined source
2
Delivery route Gravity or specified enteral pump
3
Tubing and control Length, dimensions, material, clamp and chamber
4
Connection system Source, administration, extension, syringe and patient end
5
Packaging and label Sterile status, artwork, UDI and private-label model
6
Market pathway Confirm terminology, evidence and status by REF
Configuration-specific evidence
Evidence belongs to the selected product.
These are review areas, not family-wide performance claims.
- Dimensions and connection integrity
- Leakage and flow under defined conditions
- Pump fit where applicable
- Materials and biological evaluation
- Packaging, sterilization and shelf life
- Label, IFU and market documentation
Release boundary: public values and regulatory wording require the exact BQ+ REF, current controlled evidence and specialist approval.
Start with what you know
Discuss an Enteral Requirement
A drawing is helpful but not required. A sample, catalog reference or marked-up photograph can begin the review.
Send your requirement- Target market and intended use
- Required enteral product family
- Gravity or specified pump
- Source container or fill method
- Capacity or syringe size
- Connector-system requirement
- Packaging and label model
- Drawing, sample or reference
FAQ
Questions buyers ask before requesting a configuration.
Are enteral sets the same as I.V. administration sets?
No. BQ+ keeps intended use, interfaces and documentation separate.
Does BQ+ offer ENFit-based products?
Selected products can be evaluated. Exact terminology and status require connector- and product-level review.
Can BQ+ develop a set for an enteral pump?
Yes, for a defined pump and controlled configuration with a project-specific verification route.
Are all sizes available in every market?
No. Availability depends on the released product reference, packaging and destination-market status.