BQ+ Medical

Infusion Set with Flow Regulator / Dial a flow regulator

4 weeks Lead Time + 99% on-time delivery

*Free Sample + Delivery

BQ IV Flow regulator/dial a flow tubing controls IV flow stable and accurate during the infusion procedure. Extension set and IV set with flow regulator / Dial a flow regulator available.



-Ready-to-use IV administration set equipped with flow rate regulator.

-Rapid and smooth adjustment to the doctor-recommended rate of delivery

-Clearly calibrated regulating dial from 10 to 250 ml/h to fit individual patient condition.

-Flow rate stay stable during delivery, flow rate deviation ≤ 10 % 

-Soft, clear PVC tubing with standard ID/OD 3×4.1mm, DEHP free

-Screw tight Luer Lock fitting to reduce accidental disconnection

-Peel pouch pack, EO sterilized 


Related Article

What Is Dial-A-Flow Tubing and What Does It Do?

A dial-a-flow extension set, also known as dial-a-flow tubing, is a medical device used to control the flow of a liquid or fluid via an intravenous line. Occasionally, this device is referred to as a manual flow regulator or simply as an IV flow regulator.

When using Dial-A-Flow tubing, you may adjust the dial to a value that corresponds to the milliliter per hour infusion rate. Certain infusion flow regulators enable you to set the rate of infusion in droplets per minute. Flow regulators may be an excellent cost-cutting substitute for infusion pumps. In contrast to infusion pumps, flow regulators are manually adjusted.

A Shanghai-Based, Export-oriented Medical Device Manufacturer

With 3 facilities, 400+ employees, ISO Certified, Lean Production, High-Quality

BQ+ Medical is a manufacturer dedicated in Infusion therapy products.  

For you, BQ+ customizes sets of Infusion, Transfusion, Oncology & Enteral feeding with in-house Components molding, Assembling, and EO Sterilization.

BQ+ Medical not only produces components for manufacturers worldwide but also provides private-label manufacturing for leading brand distributors in different countries.

Looking for reliable partners among Chinese IV factories?

If you are among the increasing of business looking for reliable IV manufacturer  as long term partner in China, we’ve got you covered. We supply components, customize finished sets,  provide private labelling since 2005 for costomers from 60+ countries.


Factory Tour

3 factories with 25000sqm production area, 5000sqm Class 100K Clean Room, 40 injection machines, 6 extrusion machines,  400+ employees, total 204 cubic meter EO sterilization capacity.


Quality & Regulation

BQ+ facilities are ISO13485 Certified, FDA registered, CFDA Class II production licensed manufacturer. BQ+ Medical provide ETO sterilization service, which is also FDA registered, ISO11135 certified.


Process to start

BQ+ Medical streamlines the process,  to ensure that the business discussion, supplier audit, manufacturing, and delivery of the goods is as efficient as possible.  All this with competitive price, quality and lead time.

Send us a message.
We would love to hear from you


Frequently Asked Questions

The MOQ for Flow regulator infusion set/dial a flowing tubing is around 50,000

For flow regulator/dial a flow components, we can put about 600K units in the 20GP container. We can put about 70K-80K units per 20GP container for flow regulator/dial a flow extension lines.

4 weeks for flow regulator/dial a flow component and 5 weeks for complete flow regulator infusion sets/dial a flow tubing with artworks and payment ready in advance.

Yes, we usually send 5-10 units of flow regulator/dial a flow samples for free.

Sure, we can share the technical data sheet for the flow regulator/dial a flow with you.



Model Detailed Configration Individual Packaging Pcs/Ctn Carton Size
A Air vented chamber with 15um filter + roller clamp + flow regulator + spin luer lock + prime stop cap Peel pouch or soft blister 100 Upon tubing length
B Air vented chamber with 15um filter + roller clamp+needle free injection site + flow regulator + spin luer lock + prime stop cap Peel pouch or soft blister 100 Upon tubing length
Basic: Air vented chamberi with 15um filter + roller clamp + flow regulator + male luer lock + prime stop cap
Options for standard add-on features:
-Y injection site with handy safe grip plate
-Needle free valve
-Stopcocks for needle-free injection , aspiration and parallel infusion
-Back check valve preventing backflow of solutions and blood
-Various tubing lengths for better patient mobility and others

Have supply chain delay issues?

4 Weeks Lead Time + 99% On-time Delivery

*We pay for your loss if delay happen with us

Request a